Metric Gauge Block Tolerances (ISO 3650:1998)
Back to Data SheetsNominal Length | Tolerances | ||||||||
Calibration Grade K | Grade 0 | Grade 1 | Grade 2 | ||||||
Over (mm) | Up to and including (mm) | Deviation of length from nominal length any point ±µm | Variation in length µm | Deviation of length from nominal length any point ±µm | Variation in length µm | Deviation of length from nominal length any point ±µm | Variation in length µm | Deviation of length from nominal length any point ±µm | Variation in length µm |
0.5 | 10 | 0.2 | 0.05 | 0.12 | 0.1 | 0.2 | 0.16 | 0.45 | 0.3 |
10 | 25 | 0.3 | 0.05 | 0.14 | 0.1 | 0.3 | 0.16 | 0.6 | 0.3 |
25 | 50 | 0.4 | 0.06 | 0.2 | 0.1 | 0.4 | 0.18 | 0.8 | 0.3 |
50 | 75 | 0.5 | 0.06 | 0.25 | 0.12 | 0.5 | 0.18 | 1 | 0.35 |
75 | 100 | 0.6 | 0.07 | 0.3 | 0.12 | 0.6 | 0.2 | 1.2 | 0.35 |
100 | 150 | 0.8 | 0.08 | 0.4 | 0.14 | 0.8 | 0.2 | 1.6 | 0.4 |
150 | 200 | 1 | 0.09 | 0.5 | 0.16 | 1 | 0.25 | 2 | 0.4 |
200 | 250 | 1.2 | 0.1 | 0.6 | 0.16 | 1.2 | 0.25 | 2.4 | 0.45 |
250 | 300 | 1.4 | 0.1 | 0.7 | 0.18 | 1.4 | 0.25 | 2.8 | 0.5 |
300 | 400 | 1.8 | 0.12 | 0.9 | 0.2 | 1.8 | 0.3 | 3.6 | 0.5 |
400 | 500 | 2.2 | 0.14 | 1.1 | 0.25 | 2.2 | 0.35 | 4.4 | 0.6 |
500 | 600 | 2.6 | 0.16 | 1.3 | 0.25 | 2.6 | 0.4 | 5 | 0.7 |
600 | 700 | 3 | 0.18 | 1.5 | 0.3 | 3 | 0.45 | 6 | 0.7 |
700 | 800 | 3.4 | 0.2 | 1.7 | 0.3 | 3.4 | 0.5 | 6.5 | 0.8 |
800 | 900 | 3.8 | 0.2 | 1.9 | 0.35 | 3.8 | 0.5 | 7.5 | 0.9 |
900 | 1000 | 4.2 | 0.25 | 2 | 0.4 | 4.2 | 0.6 | 8 | 1 |
Download the Data Sheet Download Here
Get in touch
Please complete all fields below.