Opus Metrology

Opus Metrology
Corby NN17 4DR
England
t: +44(0) 1536 204681
f: +44(0) 1536 205272
e: sales@opus.co.uk
Opus Metrology is the trading name of Thomas Salvesen Enterprises Ltd

Optical Parallels and Optical Flats

Opus optical parallels

Optical Parallels
Opus optical parallels have been specifically designed to check the flatness and parallelism of micrometer anvils using the natural phenomena of interference fringes.

The thickness of each optical parallel has been selected to ensure that the micrometer faces are checked at approximately every quarter turn of the micrometer screw.

Optical Flats
Interference fringes using an Opus optical flatOpus optical flats are a simple and effective way of checking the flatness of reflective surfaces, particualrly when combined with an Opus Monochromatic Light Unit.  The flats are manufactured from either fused quartz or Zerodur® to either 0.06 or 0.13 micron for flatness and diameters from 25mm to 100mm are available as standard.
We can also offer optical flats manufactured to special tolerances or diameters.

Each optic is calibrated in our own UKAS (United Kingdom Accreditation Service) laboratory for flatness and if required parallelism. You can view our UKAS accreditation schedule here .


Tungsten Carbide Gauge Blocks | Ceramic Gauge Blocks | Ceramic Tipped Gauge BlocksSteel Gauge Blocks | Gauge Block Accessories | Long Gauge Blocks | Angle Gauges | Precision Balls | Optical Products | Monochromatic Light Units | Toolmaker’s Flats | Engineer’s Parallels | Lapping | Precision Grinding | Laser Engraving | UKAS Calibration Service | IInspection Service | EN ISO 3650 | Gauge Block Set CompositionAccessory Set Details | Angle Gauge Set Details | Engineers Parallels Data | About Opus | Contact Details | Send an Enquiry

Site designed, produced and hosted by RwebS
© 2013 Opus Metrology Ltd